Shape
TRUE TWIN
Sidecut
RADIAL
Flex
TWIN 6
Rider Type
PARK / RESORT
Tech Story
DARK HORSE
The Dark Horse is a new wallet-friendly iteration of the team-favorite Outsiders that crushes park jumps, side hits, and freestyle features. Pared down with only technical components you need in an array of standard and wide sizes – Dark Horse leverages its dynamic design to deliver maximum power and performance.
The Dark Horse maximizes the power potential of a lightweight and energetic board in a budget friendly contruction. It delivers the pop and power, demanded by progressive freestyle riders through with its tried and trusted combination of Dual Core™ and Special Blend Fiberglass further enhanced with 2 x 30 mm Carbon Aramid Boosters.
Camber
PARK V1
The PARK V1 camber configuration zeros out a traditional camber approach 4 cm before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a cambered board.
Construction
Topsheet Tech:
Pearlescent Screen + Gloss/Matte Pring
Glass + Resin:
HOLYSHEET™ TRI/BI MAGIC BEAN™ RESIN
HOLYSHEET™ Fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight.
Core:
DUAL CORE™
Poppy lightweight Poplar core combined with Beech for increased power and durability.
Additives:
2 x 30 mm CARBON ARAMID BOOSTERS
Known for its rigidity, high-tensile strength, low weight, high-temperature tolerance, and low thermal expansion, Carbon Fiber is one of the most popular materials used in today’s high-performance applications. We increase power and response on a wide range of models by integrating different adaptations of carbon fiber thickness, width, weight, or weave while ensuring our boards remain ultralight.
Base:
SUPERDRIVE™ BASE
The SUPERDRIVE™ base material lives in the Sintruded category of boards that deliver benefits of both sintered and extruded bases. These bases take the characteristics and manufacturing techniques used in creating extruded base material, but due to higher pressure and temperature, increase the surface hardness to levels near most sintered bases. This expands the durability and surface strength, creating a base that will be more durable when jibbing and ripping around the mountain while retaining a low maintenance and carefree lifespan of the board.
Specs
| |
154W |
160W |
| Effective Edge (mm) |
1200 |
1250 |
| Waist |
25.8 |
26.8 |
| Nose/Tail |
30.1/30.1 |
31.2/31.2 |
| Taper |
0 |
0 |
| Sidecut |
8.0 |
8.5 |
| Ref. Stance (cm/in) |
53.3/21 |
58.4/23 |
| Suggested Weight (lb/kg) |
130-190/59-86 |
100-150/45-68 |
| Suggested Boot Size |
M 10+ |
M 10+ |
